Every guide on this site starts from a question a buyer or plant engineer actually sent in — what fineness a paste will reach, why a batch will not blend, which mill suits a color change every shift. Each number is traced back to a parameter table, a drawing or a production record before it is published.
Six process areas cover most of the technical questions that reach the POLYC sales desk. Each one has a matching guide in the index further down this page.
Immersion depth, basket geometry and bead size against batch size, viscosity and the color-change interval.
Zirconia, glass and steel media compared on density, wear and the fineness each one realistically reaches.
Why the dispersion stage, not the mill, decides most of the final fineness and the number of passes needed.
Laminar flow, surface renewal and scraper geometry in planetary and double-shaft mixers above 100,000 cps.
Roll gap, speed ratio and the temperature rise that governs how far a high-viscosity paste can be taken.
What to measure between delivery and sign-off, and which acceptance figures belong in the contract.
Three guides that answer the questions buyers ask before a line is quoted.
Single-shaft, double-shaft and lift-type basket mills, with the batch size each configuration actually holds.
Read the guideMedia density, bead diameter and wear rate, and how each one moves the fineness you can hold in production.
Read the guideWhere the dispersion stage should stop and the milling stage should start, and what happens when it is wrong.
Read the guideFour rules apply to everything published under my name.
Topics come from enquiry forms, WhatsApp threads and commissioning reports, not from a keyword list. If nobody has asked it, it does not get a page.
Capacity, power, fineness and viscosity figures are taken from a parameter table, a general arrangement drawing or a production record. Where a figure is an estimate, the guide says so.
A guide that only lists strengths is a brochure. Each one names the viscosity, bead size or batch size at which the equipment is the wrong choice.
Specification pages are reviewed against the current parameter sheet; the review date is on the page, and a changed figure replaces the old one rather than sitting next to it.
“A guide is useful when a buyer can act on it without calling us first. If it cannot be acted on, it is marketing.”
The full set, grouped the way a production line is laid out rather than alphabetically.
Short answers to the six questions that come up before a guide is read in full.
Batch size, target fineness, viscosity range and the solvent system are enough to start. You get a reply from the technical team, not an automated acknowledgement.
Shanghai POLYC Technology Co., Ltd. — Wuxi manufacturing plant, Jiangsu, China
The machine families the guides refer to most often.
Lift-type basket mill with a sealed grinding chamber, sized for small to mid batches and short color cycles.
Pin and disc geometries, with the media size and chamber volume that decide the fineness ceiling.
Planetary and double-shaft configurations with wall scrapers for pastes above 100,000 cps.
The pre-dispersion stage that decides how much work the mill still has to do.